Technical Data and Specifications
General Specifications
Height of boom to ground in lowest travel position.......11ft.
Boom Length (16 ft. with 4 ft. extension)......................20 ft.
Optional boom lengths (fixed).............................16,17,18 ft.
Lifting Capacity at 20 feet (with grapple)................3300 lbs.
Weight of loader, body and chassis (empty)........22,500 lbs.
Outrigger extended.......................................................12ft.
retracted..........................................................8ft.
Body Hoist Capacity..............................................30,000
lbs.
Bucket
360° continuous rotation, Optional 270°
Width................................................................................4
ft.
Fully Open.........................................................................5
ft.
High strength tempered steel replaceable cutting edges
Recommended Chassis
Cab to axle (CA)...........................See Chassis
Requirements
Front Axle........................................10,000 lbs. or 12,000
lbs.
Rear Axle.........................................23,000 lbs. or 21,000
lbs.
GVW.........................................................minimum 33,000
lbs.
Engine...........................................................minimum
190 HP
Transmission...........................................automatic or manual
Frame..............................................................1,500,000
RBM
Body
Length....................................................................18,19,20
ft.
Capacity....................................................20,24,25,30
cu. yds.
Tilt to 45° for dumping
Two heavy-duty "barn type" doors
Floor - 3/16 inch smooth steel plate
Sides - 10 gauge beams - 7 inch main, 4 inch cross
H-frame style outriggers
| |
 |
The KB Series
has been designed for easy operator access, easy service,
easy maintenance, and with low initial cost, it makes this
loader a great ECONOMICAL package. |
| |
|
|
| |
 |
A user-Friendly KB Series truck
body makes loading and unloading heavy, bulky materials easier.
Two heavy-duty doors swing completely open for easy discharge. Also
available is an optional scow (open back) type body. |
| |
|
 |
The KB Series boom hoses are protected
from debris with no hoses exposed below the rotator. The boom
is equipped with a continuous rotating grapple. The grapple
is constructed with bolt-on-heat-treated steel cutting edges.
The edges are overlapping allowing the grapple to close completely.
This is a distinct feature that puts this grapple in a CLASS
OF ITS OWN. |
| |
|
 |
Safety features include hydraulic hoses enclosed in a pedestal
structure. For superior safety, the KB
Series features a pilot operated check valves as an
integral part of each boom and outrigger cylinders. Shown
with optional pilot operated electronic joystick controls. |
| |
|
 |
The KB Series truck body is equipped
with twin telescopic dump cylinders, providing a 45-degree body
tilt. the KB Series offers a structurally
sound, heavy-duty loader that will withstand the test of time. |
All design, specifications and components are subject
to change at the manufacturer’s sole discretion at any time without
notice. Data published herein is for information purposes only and shall
not be constructed to warrant suitability of the unit for any particular
purpose, as performance may vary with the conditions encountered.The only
warranty is our standard written warranty for this product at the time
of shipment.
|
