KB-220 Series

The KB-220 Series functions in Solid Waste, Tree Care, and Forestry Industry. Quality built with pride.

 

Technical Data and Specifications

General Specifications

Height of boom to ground in lowest travel position (based on 42 in. chassis height)12 ft. 6 in. stand up
13 ft. 1 in. rotating platform
Boom length 22 ft. fixed
Optional boom lengths 25 ft. (22 ft. with 3 ft. extended)
Boom rotation270° non-continuous (stand up)
360° continuous (rotating platform)
Lifting capacity at 22 ft. (with bucket)3,000 lbs.
A Style outriggers

HydraulicsTandem pump for simultaneous operation of multiple functions
Operator controls
StandupPilot operated hydraulic joysticks
Rotating platformMechanical joysticks or pilot operated hydraulic joysticks

Bucket

360° continuous rotation
Width4 ft.
(optional 32")
Fully open5 ft.
High strength tempered steel replaceable cutting edges

Recommended Chassis

Cab to axle (CA)See Chassis Requirements
Front axle16,000 lbs. (minimum)
Rear axle30,000 lbs. (minimum) - single rear axle
40,000 lbs. (minimum) - tandem rear axle
GVW46,000 lbs. (minimum) - single rear axle
56,000 lbs. (minimum) - tandem rear axle
Engine250 HP (minimum)
TransmissionAutomatic or manual
Frame1,800,000 RBM

Body

Length20 or 24 ft.
Capacity30/ 40 / 56 cubic yds.
Tilt to 45° for dumping
Door styleSingle, double, or scow
Floor3/16 in. (1/4 in. optional)
4 in. joist with 12 in. spacing
SidesSide ribs 24 in. spacing
TarpSpring assist with arm, spring assist armless, electric with arm
LightingIncandescent and L.E.D.
Mid-body turn signals (where applicable)
Smart light (optional)
Customer specific light location

Features

All design, specifications and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be constructed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written warranty for this product at the time of shipment.