RL Series

Technical Data and Specifications

Model

RL6

RL8

RL10

Capacity6 cubic yds.8 cubic yds.10 cubic yds.
Hopper capacity1 cubic yd.1 cubic yd.1 cubic yd.
Overall length (tailgate closed)162 in.186 in.210 in.
Body width87 in.87 in.87 in.
Body weight (approximate)7,235 lbs.7,680 lbs.8,120 lbs.
Inside hopper width66.3 in.66.3 in.66.3 in.
Frame to highest point
Tailgate open
Tailgate closed

111.75 in.
69 in.

111.75 in.
69 in.

111.75 in.
69 in.

Body Specifications

RL6

RL8

RL10

Sidewalls10 Ga high tensile steel10 Ga high tensile steel10 Ga high tensile steel
Floor (flat, no trough)10 Ga high tensile steel10 Ga high tensile steel10 Ga high tensile steel
Roof10 Ga high tensile steel10 Ga high tensile steel10 Ga high tensile steel
Ejection panel10 Ga high tensile steel10 Ga high tensile steel10 Ga high tensile steel
Hopper3/16 in. T1 steel3/16 in. T1 steel3/16 in. T1 steel
Packer panel3/16 in. T1 steel3/16 in. T1 steel3/16 in. T1 steel
Slide panel3/16 in. T1 steel3/16 in. T1 steel3/16 in. T1 steel
Lower tailgate sides3/16 in. T1 steel3/16 in. T1 steel3/16 in. T1 steel
Upper tailgate sides10 Ga high tensile steel10 Ga high tensile steel10 Ga high tensile steel
Load sill above hopper1.25 in.1.25 in.1.25 in.
Cylinder
EjectorSingle stage 4.5 in. bore2-stage 4.5 in. bore2-stage 4.5 in. bore
Tailgate3.5 in. bore3.5 in. bore3.5 in. bore
Slide3.5 in. bore3.5 in. bore3.5 in. bore
Packer3.5 in. bore3.5 in. bore3.5 in. bore
Valves
Supply shut offBallBallBall
Packing controlsSectional spoolSectional spoolSectional spool
Ejector/tailgate raiseSectional spoolSectional spoolSectional spool

Performance Specifications


RL6


RL8


RL10

Packing Cycles
Complete16 sec. 16 sec. 16 sec.
Reload7 sec.7 sec.7 sec.
Max operating pressure2,6002,6002,600
Gallons per minute (GPM)12 GPM @ 1,200 RPM12 GPM @ 1,200 RPM12 GPM @ 1,200 RPM
Reservoir30 gal.30 gal.30 gal.

Chassis Requirements

RL6

RL8

RL10

Minimum GVWR17,000 lbs. 19,500 lbs.21,000 lbs.
Useable CA84-86 in.108 in.134-138 in.
Minimum after frame36 in.36 in.36 in.

Standard Features

Tailgate props
Curb-side driver alert button
Upper stop, tail, turn lights
Single rear strobe light
Lighting
L.E.D. lights

Optional Equipment

Reeving mechanism
Cart tipper, single or dual
Front mount pump system
Rear view camera system
Lighting
Hopper work lights
L.E.D. Smart lights

All design, specifications and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be constructed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written warranty for this product at the time of shipment.