RLM

Technical Data and Specifications

Model

RLM11

RLM13

RLM16

Capacity11 cubic yards13 cubic yards16 cubic yards
Hopper Capacity2.6 cu. yd.2.6 cu. yd.2.6 cu. yd.
Body Weight (Body Shell Only)3,187 lbs.3,396 lbs.3,709 lbs.
Body Weight (Complete Unit)10,320 lbs.10,530 lbs.10,580 lbs.
Hopper Inside Width80 in.80 in.80 in.

Body Construction Specifications



RLM11



RLM13



RLM16

Sidewalls (curved shell)11 ga. / 50,000 psi11 ga. / 50,000 psi11 ga. / 50,000 psi
Floor (single sheet, flat)3/16 in / 50,000 psi3/16 in / 50,000 psi3/16 in / 50,000 psi
Roof (curved shell)11 ga / 50,000 psi11 ga / 80,000 psi11 ga / 80,000 psi
Ejection Panel Face11 ga. / 50,000 psi11 ga. / 50,000 psi11 ga. / 50,000 psi
Hopper1/4 in / 100,000 psi (T-1)1/4 in / 100,000 psi (T-1)1/4 in / 100,000 psi (T-1)
Packer Panel Face3/16 in / 100,000 psi (T-1)3/16 in / 100,000 psi (T-1)3/16 in / 100,000 psi (T-1)
Slide Panel Face3/16 in / 50,000 psi3/16 in / 50,000 psi3/16 in / 50,000 psi
Hopper Sides3/16 in / 100,000 psi (T-1)3/16 in / 100,000 psi (T-1)3/16 in / 100,000 psi (T-1)

Hydraulic System


RLM11


RLM13


RLM16

Cylinder
Ejector(1) Multi-stage 5.5 in. bore(1) Multi-stage 5.5 in. bore(1) Multi-stage 6.5 in. bore
Tailgate(2) 3 in. bore, 1.75 in. rod, 30.5 in. stroke(2) 3 in. bore, 1.75 in. rod, 30.5 in. stroke(2) 3 in. bore, 1.75 in. rod, 30.5 in. stroke
Slide(2) 4.5 in. bore(2) 4.5 in. bore(2) 4.5 in. bore
Packer(2) 4.5 in. bore(2) 4.5 in. bore(2) 4.5 in. bore
Valves
ShutoffBallBallBall
Packing ControlsSectional SpoolSectional SpoolSectional Spool
Ejector/Tailgate RaiseSectional SpoolSectional SpoolSectional Spool
Operating Pressure in PSI2,2002,2002,200
Maximum Operating Pressure2,4002,4002,400
Gallons Per Minute (GPM)35-38 GPM35-38 GPM35-38 GPM
Reservoir50 gal.50 gal.50 gal.
Parking Cycle Time
Complete17-19 sec.17-19 sec.17-19 sec.
Reload3 sec.3 sec.3 sec.
Compaction Rate in Lbs./Yard800-900800-900800-900

Chassis Requirements



RLM11


RLM13/h3>


RLM16

Minimum GVWR31,000 lbs33,000 lbs38,000 lbs
Minimum GAWR
Front Axle8,00010,00012,000
Rear Axle23,00023,00026,000
Usable CA (+/- 2 in.)112 in.128 in.153 in.
Minimum After Frame343434

 

Standard Features:

  • One-piece flat floor
  • Curved shell body
  • Fast cycle time
  • Meets or exceeds ANSI standards
  • Wide-open accessibility for cleaning and maintenance
  • Automatic latches and integrated holding props
  • The industry’s highest standard for hydraulic cleanliness
  • LED lighting, weatherproof connections and braided loom
  • Heat-treated pins and replaceable bushings throughout
  • Safety interlock on access floor
  • Emergency stop on curb side
  • Driver alert buttin on both sides
  • Sectional valves
  • 80 in. hopper width

Accessories:

  • Single or dual cart tippers
  • 12K reeving cylinder and container latches
  • Kick bar and container latches
  • Front-mounted pump
  • Amber or clear beacon rear strobes (single or dual)
  • Amber oval flush-mount rear strobes front and/or rear
  • Smart light strobe system
  • Rear vision camera
  • Work lights over hopper and tailgate sides
  • Frame mounted water cooler
  • Frame mounted tool box
  • Wash-out tank
  • Street side emergency stop
  • Pressure gauge

 

All design, specifications and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be constructed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written warranty for this product at the time of shipment.