RL Series Rear Loader Standard Features
- Engineered using 3-D (FEA) Solid Modeling
- Meets or Exceeds ANSI Standards
- Tailgate Props
- Return Line Filtration, 10 Micron
- Engine Speed-up System with Overspeed Protection
- Curb Side Driver Alert Button
- Rear Mud Guards
- Upper Stop, Tail, Turn Lights
Optional Equipment
- Reeving Cylinder
- Cart Tipper, Single or Dual
- Front Mount Pump System
- Single Rear Strobe Light
- Rear View Camera System
- Hopper Work Light
General Specifications
Model |
RL20 |
RL20H |
RL25H |
| Capacity |
20 cu. yd |
20 cu. yd. |
25 cu. yd. |
| Overall Length |
255 in. |
255 in. |
274 in. |
| Body Length |
179 in. |
179 in. |
215 in. |
| Body Width |
94 in. |
94 in. |
94 in. |
Body Weight |
12,500 lbs. |
12,600 lbs. |
13,500 lbs. |
Inside Hopper Width |
81.5 in |
81.5 in |
81.5 in |
Overall Tailgate Raised |
291 in. |
291 in. |
327 in. |
Height Above Chassis |
98 in. |
98 in. |
98 in. |
Body Specifications |
RL 20 |
RL20H |
RL25H |
Sidewalls |
10ga/50,000psi |
10ga/80,000psi |
10ga/80,000psi |
Floor (Trough) |
3/16in/50,000psi |
3/16in/50,000psi |
3/16in/50,000psi |
Roof |
10 ga/50,000psi |
10 ga/80,000psi |
10 ga/80,000psi |
Ejection Panel |
3/16in/50,000psi |
3/16in/50,000psi |
3/16in/50,000psi |
Hopper |
1/4in/100,000psi |
1/4in/100,000psi |
1/4in/100,000psi |
Hopper Capacity |
3.0 cu. yd. |
3.0 cu. yd. |
3.0 cu. yd. |
Packer Panel |
3/16in/100,000psi |
3/16in/100,000psi |
3/16in/100,000psi |
Slide Panel |
3/16in/100,000psi |
3/16in/100,000psi |
3/16in/100,000psi |
Tailgate (hopper slides) |
3/16in/100,000psi |
3/16in/100,000psi |
3/16in/100,000psi |
Packing Cycles |
|
|
|
Complete |
18-20 sec. |
26-28 sec. |
26-28 sec. |
Reload |
8-10 sec. |
10-12 sec. |
10-12 sec. |
Cylinder |
|
|
|
Ejector |
(1) 3 stage 5.5in bore |
(1) 3 stage 5.5in bore |
(1) 4 stage 6.5in bore |
Tailgate |
(2) 3 in bore |
(2) 3 in bore |
(2) 3 in bore |
Slide |
(2) 4.5 in bore |
(2) 5 in bore |
(2) 5 in bore |
Packer |
(2) 4 in bore |
(2) 4.5 in bore |
(2) 4.5 in bore |
Max Operating Pressure |
2500 |
2500 |
2500 |
Gallons per Minute |
35-38 |
35-38 |
35-38 |
Reservoir |
50 gal. |
50 gal. |
50 gal. |
Valves |
|
|
|
Supply
Shut Off |
ball |
ball |
ball |
Packing
Controls |
spool |
spool |
spool |
Ejector/Tailgate
raise |
spool |
spool |
spool |
Chassis Requirements |
RL20 |
RL20H |
RL25H |
Minimum GVWR |
33,000 lbs |
43,000 lbs |
54,000 lbs |
Useable CA |
144 in |
144 in |
|
Useable CT |
|
|
157 in |
Minimum After Frame |
96 in |
96 in |
96 in |
All design, specifications and components are
subject to change at the manufacturer’s sole discretion at
any time without notice. Data published herein is for information
purposes only and shall not be constructed to warrant suitability
of the unit for any particular purpose, as performance may vary
with the conditions encountered.The only warranty is our standard
written warranty for this product at the time of shipment.
|
